Browse Editions : 2012 / Q1
Title Author Edition
Catalysts for maximising middle distillates

Ruben Miravalles, Tamara Galindo, Repsol

2012 / Q1

Collaboration in catalyst development and application, from laboratory scale to commercial operation, enabled a refiner to achieve production objectives.

More

Using cold boiler feed water for energy recovery

Alisan Dogan, Turkish Petroleum Refineries Corporation

2012 / Q1

Feeding membrane deaerated cold boiler feed water to appropriate units will enable waste heat to replace substantial steam duty in a refinery

More

Cost estimating for turnarounds

Gordon Lawrence, Asset Performance Networks

2012 / Q1

Cost estimates for refinery turnarounds can lack accuracy, but lessons learned from capital project estimating could improve matters

More

Abatement of hydrogen sulphide in asphalt

Jennifer Draper and Joseph Stark, Baker Hughes

2012 / Q1

Risks of exposure at asphalt loading platforms require reliable monitoring of H2S levels and a programme of abatement using effective chemical scavengers.

More

Oxygen enrichment in desulphurisation

Shivan Ahamparam and Stephen Harrison, Linde

2012 / Q1

Oxygen enrichment technology is a viable and cost-effective solution for significantly increasing sulphur treatment capacity.

More

Green retarder technology for the styrene industry

Lisheng Xu, Javier Florencio, Vincent Lewis and Christopher Morrison, Nalco

Ana Guzman, Carmen Monfort and Ana Olivares, Repsol Quimica Tarragona

2012 / Q1

Increased environmental and safety awareness in the styrene industry has led to the development of more acceptable alternatives to toxic nitrophenolic retarders

More

Energy recovery with compact heat exchangers

Marcos Matsufugi, Alfa Laval

2012 / Q1

Compact heat exchangers are used for heat recovery applications where high efficiency is vital, space or weight constraints apply, or exotic materials are required

More

Low rare earth catalysts for FCC operations

Yen Yung and Ken Bruno, Albemarle Corporation

2012 / Q1

Features including high zeolite and matrix stability and high accessibility architecture characterise a family of low rare earth FCC catalysts

More

Catalyst additives reduce rare earth costs

Ray Fletcher, Intercat

2012 / Q1

Catalyst additive technologies help to control rare earth costs in fresh FCC catalyst additions and in SOx capture

More

Consolidation of refinery control rooms

Eric Jan Kwekkeboom, Yokogawa Europe & Africa

2012 / Q1

Migration of a refinery's DCS provided an opportunity to reconfigure and consolidate the control rooms and operations management system

More

Integrated monitoring for optimising crude distillation

Gregory Shahnovsky, Tal Cohen and Ronny McMurray, Modcon-Systems Ltd

2012 / Q1

On-line process analysers in crude distillation units prevent lost throughput caused by non-conforming process conditions and crude oil switching

More

Crude oil vapour pressure testing

Hannes Pichler and Klaus Hense, Grabner Instruments, a subsidiary of Ametek

2012 / Q1

Vapour pressure testing is an important safety check in the transport, storage and blending of crude oil

More

Optimised hydrogen production by steam reforming: part I

Sanke Rajyalakshmi, Kedar Patwardhan and P V Balaramakrishna, Larsen and Toubro

2012 / Q1

Modelling optimisation of process and design parameters for minimising natural gas consumption in hydrogen production by steam reforming

More

Improved catalytic reforming

Anthony Poparad, Beatrix Ellis, Bryan Glover and Stephen Metro, UOP LLC, A Honeywell Company

2012 / Q1

Catalyst solutions help to improve the profitability and reliability of reforming units

More

New crude oil basket for hydrogen savings

Rajeev Kumar, Prashant Parihar and Ravi K Voolapalli, Corporate R&D Centre, Bharat Petroleum Corporation Ltd, India

2012 / Q1

The processing requirements of opportunity crudes are considered for the operations of the Indian refineries

More


Go Back